| 1 - 0101 Introduction English.srt | 2.5 KB | ||
| 1 - 0101 Introduction.mp4 | 14.7 MB | ||
| 10 - 0304 Width Extents option in Flange tool English.srt | 4.5 KB | ||
| 10 - 0304 Width Extents option in Flange tool.mp4 | 34.8 MB | ||
| 11 - 0305 Loop seletion and conner modification English.srt | 3.2 KB | ||
| 11 - 0305 Loop seletion and conner modification.mp4 | 28.6 MB | ||
| 12 - 0306 Create Contour Flange English.srt | 6.9 KB | ||
| 12 - 0306 Create Contour Flange.mp4 | 62.8 MB | ||
| 13 - 0307 Create rolled flange using contour roll tool English.srt | 3.6 KB | ||
| 13 - 0307 Create rolled flange using contour roll tool.mp4 | 26 MB | ||
| 14 - 0308 Add contour roll to existing sheetmetal body English.srt | 2.1 KB | ||
| 14 - 0308 Add contour roll to existing sheetmetal body.mp4 | 20.6 MB | ||
| 15 - 0309 Unroll method in Contour roll tool English.srt | 4.3 KB | ||
| 15 - 0309 Unroll method in Contour roll tool.mp4 | 32 MB | ||
| 16 - 0310 Create Ham on a sheetmetal body English.srt | 4.5 KB | ||
| 16 - 0310 Create Ham on a sheetmetal body.mp4 | 32.5 MB | ||
| 17 - 0401Create flange using fold tool English.srt | 5.8 KB | ||
| 17 - 0401Create flange using fold tool.mp4 | 40.9 MB | ||
| 18 - 0402 Create bend between sheetmetal bodies English.srt | 4.5 KB | ||
| 18 - 0402 Create bend between sheetmetal bodies.mp4 | 33.5 MB | ||
| 19 - 0501 Bend Settings English.srt | 7.4 KB | ||
| 19 - 0501 Bend Settings.mp4 | 56.7 MB | ||
| 2 - 0102 Find Exercise files and Captions English.srt | 1.8 KB | ||
| 2 - 0102 Find Exercise files and Captions.mp4 | 9.9 MB | ||
| 20 - 0502 Corner settings Part 1 English.srt | 5.4 KB | ||
| 20 - 0502 Corner settings Part 1.mp4 | 37.5 MB | ||
| 21 - 0503Corner settings Part 2 English.srt | 4.2 KB | ||
| 21 - 0503Corner settings Part 2.mp4 | 38.3 MB | ||
| 22 - 0504Unfolding options in a different flange creation tools English.srt | 6.8 KB | ||
| 22 - 0504Unfolding options in a different flange creation tools.mp4 | 54.1 MB | ||
| 23 - 0601 Remove material using CUT tool English.srt | 3.9 KB | ||
| 23 - 0601 Remove material using CUT tool.mp4 | 34.2 MB | ||
| 24 - 0602 Cut normal in a CUT tool English.srt | 2.6 KB | ||
| 24 - 0602 Cut normal in a CUT tool.mp4 | 20.6 MB | ||
| 25 - 0603 Corner seam English.srt | 4.7 KB | ||
| 25 - 0603 Corner seam.mp4 | 47.1 MB | ||
| 26 - 0604 Corner round and corner chamfer English.srt | 4.8 KB | ||
| 26 - 0604 Corner round and corner chamfer.mp4 | 30.3 MB | ||
| 27 - 0605 Split body using RIP tool English.srt | 3.9 KB | ||
| 27 - 0605 Split body using RIP tool.mp4 | 29.3 MB | ||
| 28 - 0606 Unfold and refold sheetmetal body English.srt | 6.6 KB | ||
| 28 - 0606 Unfold and refold sheetmetal body.mp4 | 54.8 MB | ||
| 29 - 0701 Create flat pattern of a sheetmetal body English.srt | 6.3 KB | ||
| 29 - 0701 Create flat pattern of a sheetmetal body.mp4 | 38.6 MB | ||
| 3 - 0103 Exercise Files.html | 0 B | ||
| 30 - 0702 Flat pattern orientation English.srt | 3.4 KB | ||
| 30 - 0702 Flat pattern orientation.mp4 | 16.3 MB | ||
| 31 - 0703 Define Aside English.srt | 3.8 KB | ||
| 31 - 0703 Define Aside.mp4 | 23.9 MB | ||
| 32 - 0704 Apply and edit bend order annotation English.srt | 4.2 KB | ||
| 32 - 0704 Apply and edit bend order annotation.mp4 | 20.9 MB | ||
| 33 - 0705 Add cosmetic line on a flat pattern English.srt | 2.9 KB | ||
| 33 - 0705 Add cosmetic line on a flat pattern.mp4 | 19.5 MB | ||
| 34 - 0706 Exporting Flat Pattern English.srt | 4.3 KB | ||
| 34 - 0706 Exporting Flat Pattern.mp4 | 28.2 MB | ||
| 35 - 0801 Convert a 3d model to a sheetmetal body English.srt | 3.6 KB | ||
| 35 - 0801 Convert a 3d model to a sheetmetal body.mp4 | 19.8 MB | ||
| 36 - 0802 Corner seam to control sheetmetal corner English.srt | 4.1 KB | ||
| 36 - 0802 Corner seam to control sheetmetal corner.mp4 | 31.2 MB | ||
| 37 - 0803 Use direct editing tool for a sheetmetal body English.srt | 4.1 KB | ||
| 37 - 0803 Use direct editing tool for a sheetmetal body.mp4 | 35.3 MB | ||
| 38 - 0901 Create Multibody sheetmetal part file English.srt | 4.7 KB | ||
| 38 - 0901 Create Multibody sheetmetal part file.mp4 | 37.5 MB | ||
| 39 - 0902 Flat pattern of multibody sheetmetal body English.srt | 4.2 KB | ||
| 39 - 0902 Flat pattern of multibody sheetmetal body.mp4 | 29.8 MB | ||
| 4 - 0201 Understanding Sheetmetal working environment English.srt | 7.4 KB | ||
| 4 - 0201 Understanding Sheetmetal working environment.mp4 | 40.7 MB | ||
| 40 - 1001 Add punch feature using punch tool English.srt | 4.2 KB | ||
| 40 - 1001 Add punch feature using punch tool.mp4 | 34.6 MB | ||
| 41 - 1002 Make punch feature to remove material on a sheetmetal body English.srt | 4.6 KB | ||
| 41 - 1002 Make punch feature to remove material on a sheetmetal body.mp4 | 44.2 MB | ||
| 42 - 1003 Make punch feature to deform material on a sheetmetal body English.srt | 5 KB | ||
| 42 - 1003 Make punch feature to deform material on a sheetmetal body.mp4 | 47.5 MB | ||
| 43 - 1101 Lofted flange tool English.srt | 5.5 KB | ||
| 43 - 1101 Lofted flange tool.mp4 | 39.6 MB | ||
| 44 - 1102 Sheetmetal Mirror English.srt | 5.4 KB | ||
| 44 - 1102 Sheetmetal Mirror.mp4 | 43.8 MB | ||
| 45 - 1103 Add fastener to sheetmetal English.srt | 2.3 KB | ||
| 45 - 1103 Add fastener to sheetmetal.mp4 | 22 MB | ||
| 46 - 1201 Create view for a sheetmetal part English.srt | 4.9 KB | ||
| 46 - 1201 Create view for a sheetmetal part.mp4 | 28.3 MB | ||
| 47 - 1202 Add bend notes tags and bend table English.srt | 5.5 KB | ||
| 47 - 1202 Add bend notes tags and bend table.mp4 | 32.1 MB | ||
| 48 - 1203 Add punch notes tags and punch table English.srt | 6 KB | ||
| 48 - 1203 Add punch notes tags and punch table.mp4 | 31.2 MB | ||
| 49 - 1204 Add Sheetmetal iProperties in the drawing English.srt | 1.7 KB | ||
| 49 - 1204 Add Sheetmetal iProperties in the drawing.mp4 | 8.4 MB | ||
| 5 - 0202 Create part file with sheetmetal rule English.srt | 6 KB | ||
| 5 - 0202 Create part file with sheetmetal rule.mp4 | 31.2 MB | ||
| 6 - 0203 Create new sheetmetal rule English.srt | 5.1 KB | ||
| 6 - 0203 Create new sheetmetal rule.mp4 | 32.6 MB | ||
| 7 - 0301 Face tool English.srt | 8.1 KB | ||
| 7 - 0301 Face tool.mp4 | 63.3 MB | ||
| 8 - 0302 Create Flange on a sheetmetal face English.srt | 4 KB | ||
| 8 - 0302 Create Flange on a sheetmetal face.mp4 | 27.6 MB | ||
| 9 - 0303 Height extents height datum and bend position in flange tool English.srt | 8.6 KB | ||
| 9 - 0303 Height extents height datum and bend position in flange tool.mp4 | 71.8 MB | ||
| Autodesk Inventor - Sheetmetal Essential Training.ipj | 9.7 KB | ||
| Bend Settings.ipt | 90 KB | ||
| Bend annotation and table.dwg | 195.3 KB | ||
| Bend annotation and table.ipt | 551.5 KB | ||
| Bend order.ipt | 202 KB | ||
| Bend.ipt | 164.5 KB | ||
| Bonus Resources.txt | 409.6 B | ||
| Contour Roll.ipt | 108.5 KB | ||
| Corner seam.ipt | 132 KB | ||
| Cut to normal.ipt | 114.5 KB | ||
| Direct editing .igs | 232.1 KB | ||
| Direct editing .ipt | 141.5 KB | ||
| Draft.ipt | 118 KB | ||
| Flat pattern save 2.dwg | 171.2 KB | ||
| Flat pattern save.ipt | 214.5 KB | ||
| Flat pattern.ipt | 213.5 KB | ||
| Get Bonus Downloads Here.url | 204.8 B | ||
| Multibody.iam | 74 KB | ||
| Multibody.ipt | 182 KB | ||
| Part10.ipt | 146 KB | ||
| Punch annotation and table.dwg | 196.7 KB | ||
| Punch annotation and table.ipt | 441.5 KB | ||
| Punch tool.ipt | 81.5 KB | ||
| Sample assembly file.iam | 88.5 KB | ||
| Sheet Metal Sample part.ipt | 258.5 KB | ||
| Sheetmetal Flange - Fold.ipt | 130 KB | ||
| Sheetmetal Flange - bend.ipt | 106 KB | ||
| Sheetmetal Flange.ipt | 82 KB | ||
| Sheetmetal Flange2.ipt | 106 KB | ||
| Sheetmetal Mirror Assembly.iam | 89 KB | ||
| Sheetmetal mirror.ipt | 291 KB | ||
| Sheetmetal mirror_MIR.ipt | 304 KB | ||
| Sheetmetal mirror_MIR1.ipt | 261 KB | ||
| Sheetmetal view with flat pattern.dwg | 307.4 KB | ||
| Sheetmetal view.dwg | 316.6 KB | ||
| Sheetmetal view.ipt | 547 KB | ||
| Solid1.ipt | 169.5 KB | ||
| Solid2.ipt | 127 KB | ||
| Unfold and fold 2.ipt | 217 KB | ||
| Unfold and fold.ipt | 127 KB | ||
| Unfold roll.ipt | 77.5 KB | ||
| bend table (in).txt | 10.3 KB | ||
| bend table (in).xls | 45 KB | ||
| bend table (mm).txt | 10.3 KB | ||
| bend table (mm).xls | 216 KB | ||
| convert to 2.ipt | 84 KB | ||
| convert to.ipt | 83 KB | ||
| rip tool.ipt | 118 KB | ||
| ▲ 145 total files | |||
Autodesk Inventor 2021 / 2022 - Sheetmetal Training
https://TutPig.com
Last updated 11/2020
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 1.61 GB | Duration: 3h 39m
Learn Sheet Metal design using Autodesk Inventor in-depth
What you'll learn
Sheetmetal rules
Face tool
Flange tool
Contour Flange
Contour roll tool
Ham tool
Fold tool
Unfold tool
Bend settings
Corner seam
Cut tool
Unfold & Refold sheetmetal
Control Flat pattern
Exporting flat pattern
Convert to sheetmetal
Multibody sheetmetal part
Punch tool
Custom punch creation
Sheetmetal drawing
And many other important topics...
Requirements
Access Autodesk Inventor 2021 or later
Take Autodesk Inventor - Essential Training" course before starting this course.
Description
In this Autodesk Inventor Sheetmetal Training course, Expert author Asif Ahmed, Autodesk Inventor Expert will teach you how to create complex Sheetmetal parts using the advanced Sheetmetal tools in Autodesk Inventor. This course is designed for beginners and intermediate users. If anyone wants to fill up his/her gap regarding Autodesk Inventor advanced Sheetmetal topic, then this is also the right course for them.Once you have completed this computer-based training course, you will be fully capable of using these tools and techniques to create your own complex Sheetmetal part using this 3D modeling software. Working files are included, allowing you to follow along with the author throughout the lessons.In this Autodesk Inventor Sheetmetal training video tutorial series, you'll quickly have relevant skills for real-world applications.-----------------------------------------------------------------------------------------------------------------------------------ABOUT THIS COURSE:-----------------------------------------------------------------------------------------------------------------------------------Follow along with our expert instructor in this training course to get:· 3.5 hours of HD video tutorial· Over 47 individual video lectures· 1 Supplemental Resources· Full lifetime access· Access on mobile and TV· 30 days money-back guarantee· Certificate of Completion-----------------------------------------------------------------------------------------------------------------------------------Topics covered in this course:· Sheetmetal rules· Working with flange tools· Folding and Bending· Unfold rules, Bend and Corner settings· Sheetmetal modification· Flat pattern· Convert to sheetmetal· Sheet Metal Multibody· Sheetmetal punch· Sheet Metal Drawing-----------------------------------------------------------------------------------------------------------------------------------Why do you choose this course?· Progressive difficulty: we start slow and we build our way up· Exercise files· All lectures are straight to the point - minimal effort, maximum results· Learn by working, not by memorizing!· Get depth and advanced knowledge in the sketch and assembly environment.· Apply Autodesk Inventor skills easily in a production environment without struggling.· Increase confidence in Autodesk Inventor and design whatever you want· Impeccable sound and video quality· Quality instructor support: I respond to most questions in under 24 hours----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Overview
| torrent name | size | uploader | age | seed | leech |
|---|---|---|---|---|---|
| 2.9 GB | freecoursewb | 4 months | 4 | 1 | |
|
Udemy - BIM 4D Simulations Autodesk Revit, Dynamo, Navisworks and Max Posted by
freecoursewb in Other
|
1.1 GB | freecoursewb | 4 months | 6 | 1 |
| 1 MB | freecoursewb | 1 year | 0 | 0 | |
| 4.28 GB | Samiruskananus | 1 year | 17 | 0 | |
| 964.7 MB | freecoursewb | 1 year | 5 | 1 |
All Comments