| 0 | 0 B | ||
| 1. Bonus Information.mp4 | 34.1 MB | ||
| 1. Bonus Information.srt | 3.5 KB | ||
| 1. Final Quiz.html | 204.8 B | ||
| 1 | 0 B | ||
| 1. G81 Drilling cycle.mp4 | 22.2 MB | ||
| 1. G81 Drilling cycle.srt | 10.2 KB | ||
| 1. Helical Milling.mp4 | 24 MB | ||
| 1. Helical Milling.srt | 10.4 KB | ||
| 1. Introduction.mp4 | 22.7 MB | ||
| 1. Introduction.srt | 1 KB | ||
| 1. Mid Course Quiz.html | 204.8 B | ||
| 1. Program header.mp4 | 8.2 MB | ||
| 1. Program header.srt | 5.6 KB | ||
| 1. Programming example part.mp4 | 17.9 MB | ||
| 1. Programming example part.srt | 10.9 KB | ||
| 1. Studying the engineering drawing.mp4 | 10.4 MB | ||
| 1. Studying the engineering drawing.srt | 4.1 KB | ||
| 1.1 G81-Drilling-Cycle-12.png | 56.6 KB | ||
| 1.1 Helical-milling-handout-9.png | 41.7 KB | ||
| 1.1 The complete Doobry program - FREE!.html | 102.4 B | ||
| 1.1 The-Doobry-large-drawing-1.png | 58.9 KB | ||
| 1.1 header-16.png | 54.4 KB | ||
| 1.1 trig-handout.png | 38.9 KB | ||
| 1.2 Discount coupon for my course 'CNC lathe programming using G-Code'.html | 102.4 B | ||
| 1.2 G81-Drilling-Cycle-122.png | 57.3 KB | ||
| 1.2 Helical-milling-21.png | 89.2 KB | ||
| 1.2 part-1-21.png | 58.9 KB | ||
| 1.3 G81-Drilling-Cycle-35.png | 61.2 KB | ||
| 1.3 GCodeTutor website.html | 102.4 B | ||
| 1.3 part-1-angle-9.png | 47.9 KB | ||
| 1.4 Machinists Handbook - Free EBook.html | 102.4 B | ||
| 1.5 Coupon link for the course 'Foundation to CNC programming using G-Code '.html | 102.4 B | ||
| 2 | 102.4 B | ||
| 2. Covering the basics.mp4 | 13 MB | ||
| 2. Covering the basics.srt | 6.8 KB | ||
| 2. G82 Counter bore cycle.mp4 | 8.1 MB | ||
| 2. G82 Counter bore cycle.srt | 3.3 KB | ||
| 2. Roughing out the bore using helical spiral milling.mp4 | 33 MB | ||
| 2. Roughing out the bore using helical spiral milling.srt | 10.9 KB | ||
| 2. Setting the datums.mp4 | 6.6 MB | ||
| 2. Setting the datums.srt | 4.4 KB | ||
| 2.1 Cutter-compensation-1.png | 58 KB | ||
| 2.1 G82-counter-bore-cycle-G98-G99-1.png | 55.7 KB | ||
| 2.1 Setting-the-datum-3.png | 28.2 KB | ||
| 2.1 The-Doobry-prog-13.png | 81.7 KB | ||
| 2.2 G82-counter-bore-cycle-handout-1.png | 53.1 KB | ||
| 2.2 Setting-the-datum-5.png | 35.5 KB | ||
| 2.2 Units-1.png | 32.1 KB | ||
| 2.3 G82-counter-bore-cycle-1.png | 58.6 KB | ||
| 2.3 MCODES-1.png | 46.2 KB | ||
| 3. Defining the working plane using G17, G18 and G19.mp4 | 16.5 MB | ||
| 3. Defining the working plane using G17, G18 and G19.srt | 7.2 KB | ||
| 3. Finishing the bore using the G86 boring cycle.mp4 | 8.1 MB | ||
| 3. Finishing the bore using the G86 boring cycle.srt | 3.2 KB | ||
| 3. G83 Peck drilling cycle.mp4 | 15.3 MB | ||
| 3. G83 Peck drilling cycle.srt | 6 KB | ||
| 3 | 102.4 B | ||
| 3.1 G83-peck-Drilling-Cycle-handout.png | 59.4 KB | ||
| 3.1 The-Doobry-prog-2-9.png | 69.8 KB | ||
| 3.1 planes-3.png | 43.8 KB | ||
| 3.2 G83-peck-Drilling-Cycle-9.png | 55.3 KB | ||
| 3.2 planes-4.png | 56.7 KB | ||
| 3.3 G83-peck-Drilling-Cycle-2.png | 56.4 KB | ||
| 3.3 planes-29.png | 79.6 KB | ||
| 3.4 planes-1.png | 54.4 KB | ||
| 3.5 planes-2.png | 45.6 KB | ||
| 4 | 819.2 B | ||
| 4. G84 Tapping cycle.mp4 | 17.7 MB | ||
| 4. G84 Tapping cycle.srt | 7 KB | ||
| 4.1 G84-Tapping-Cycle-handout.png | 57.8 KB | ||
| 4.2 metric-coarse-tap-drill-chart.png | 32.6 KB | ||
| 4.3 G84-Tapping-Cycle-1.png | 59.1 KB | ||
| 5. G85 and G86 Boring cycles.mp4 | 9.6 MB | ||
| 5. G85 and G86 Boring cycles.srt | 4.2 KB | ||
| 5.1 G86-bore-cycle-G98-2.png | 35.1 KB | ||
| 5.2 G85-bore-cycle-handout-1.png | 41.4 KB | ||
| 5.3 G85-bore-cycle-1.png | 56.9 KB | ||
| TutsNode.com.txt | 102.4 B | ||
| [TGx]Downloaded from torrentgalaxy.to .txt | 614.4 B | ||
| 5 | 614.4 B | ||
| 6 | 1.4 KB | ||
| 7 | 2.1 KB | ||
| 8 | 2.2 KB | ||
| 9 | 102.4 B | ||
| 10 | 204.8 B | ||
| 11 | 2.6 KB | ||
| 12 | 512 B | ||
| 13 | 5.2 KB | ||
| 14 | 13.3 KB | ||
| 15 | 72.3 KB | ||
| ▲ 91 total files | |||
Description
Do you want become a CNC machinist?
Do you have access to a CNC router or milling machine and need to learn how to program it?
Maybe you are already working in a machine shop and wish to improve your skills and pay grade?
Get a foot in the door in any machine shop by learning to program CNC milling machines.
Don’t just rely on CAD/CAM to produce your parts, having a good understanding of the code CAM software outputs is an important part of being a CNC machinist.
If you are a proud owner of a desktop CNC Router or are looking to improve your knowledge in a professional industry. you need to have a complete understanding of how to program FANUC G-Code.
This course will teach you how to program CNC parts using G-Code, the language of CNC Machines.
All Cycles Explained
G81 drilling cycle
G82 Counter boring
G83 peck drilling
G84 Tapping cycle
G85 Boring Cycles
All the Techniques
G10 and G54 Datum setup
Helical milling
Programming best practices
Example programs
G17, G18 and G19 planes explained
Floating datum
Become an expert in the world of CNC machining with this course!
What this course does not teach:
Machine setup procedure
At the machine instructions
How to operate a CNC machine
Who this course is for:
Machinist apprentice
Hobbyist CNC Owner
CNC Machine operator
CNC Machining Student
Mechanical engineer
Requirements
Basic knowledge of G-Code required
Last Updated 11/2020
| torrent name | size | uploader | age | seed | leech |
|---|---|---|---|---|---|
| 891.3 MB | freecoursewb | 7 months | 2 | 0 | |
| 2.2 GB | freecoursewb | 1 year | 3 | 1 | |
| 3 GB | freecoursewb | 2 years | 0 | 0 | |
| 2 GB | freecoursewb | 4 years | 0 | 2 | |
| 1.3 GB | freecoursewb | 4 years | 1 | 1 |
All Comments