| 1. An Introduction to Internet of Things.mp4 | 48.8 MB | ||
| 1. Flashing ESP32.mp4 | 69 MB | ||
| 1. Hardware Requirements for the Complete Project.mp4 | 69.5 MB | ||
| 1. Introduction to Home Automation.mp4 | 60.1 MB | ||
| 1. Introduction to Relay.mp4 | 24.5 MB | ||
| 1. Resolving the Inverted Operation of the Relay.mp4 | 35.1 MB | ||
| 1. Understanding the Circuit Diagram for Controlling 4 Home Appliances.mp4 | 12.9 MB | ||
| 1. Understanding the Circuit Diagram to Control a Bulb with a Physical Switch.mp4 | 23.5 MB | ||
| 10. C++ Program.html | 204.8 B | ||
| 10. CODE - Controlling 4 Bulbs with 4 Physical Switches.html | 2.3 KB | ||
| 10. Understanding the Code to Control 4 Home Appliances with ESP Rainmaker (PART 6).mp4 | 45.3 MB | ||
| 10.1 L30 - CODE - Controlling 4 Bulbs with 4 Physical Switches.ino | 2.2 KB | ||
| 11. C++ Fundamentals.html | 102.4 B | ||
| 11. CODE - Controlling 4 Home Appliances with ESP Rainmaker.html | 8.2 KB | ||
| 11.1 L44 - CODE - Controlling 4 Home Appliances with ESP Rainmaker.ino | 8 KB | ||
| 2. CODE - Resolving the Inverted Operation of the Relay using the code modification.html | 512 B | ||
| 2. Circuit Diagram - Controlling 4 Home Appliances with ESP Rainmaker.html | 102.4 B | ||
| 2. Circuit diagram - Controlling a Bulb with a Physical Switch.html | 102.4 B | ||
| 2. Document - Hardware Requirements List.html | 5.3 KB | ||
| 2. Exploring ESP Rainmaker.mp4 | 23.7 MB | ||
| 2. Getting Started with ESP32.mp4 | 27.9 MB | ||
| 2. Understanding the Circuit Diagram to Test One Input of 4 Channel Relay.mp4 | 21.9 MB | ||
| 2. Uploading Final Code to ESP32.mp4 | 25.3 MB | ||
| 2.1 L19 - CODE - Resolving the Inverted Operation of the Relay using the Logical NOT Operator.ino | 307.2 B | ||
| 3. Circuit Diagram - Resolving the Inverted Operation of the Relay using NC.html | 102.4 B | ||
| 3. Circuit diagram - Testing One Input of 4 Channel Relay.html | 102.4 B | ||
| 3. Connecting and Verifying the USB to UART Chip in ESP32.mp4 | 42.3 MB | ||
| 3. ESP RainMaker Setup and Device Provisioning.mp4 | 59.8 MB | ||
| 3. Mastering GPIO Pins.mp4 | 60.6 MB | ||
| 3. Powering the Whole Circuit using One Power Supply.mp4 | 15.4 MB | ||
| 3. Understanding MQTT Protocol.mp4 | 26.2 MB | ||
| 3. Understanding the Code to Control a Bulb with a Physical Switch.mp4 | 39.4 MB | ||
| 4. Arduino Installation.mp4 | 34.3 MB | ||
| 4. CODE - Controlling a Bulb with a Physical Switch.html | 921.6 B | ||
| 4. Circuit Diagram - Powering the Whole Circuit using One Power Supply.html | 102.4 B | ||
| 4. Setting Up and Configuring Google Home.mp4 | 41 MB | ||
| 4. Understanding the Code to Test One Input of 4 Channel Relay.mp4 | 30.2 MB | ||
| 4.1 L24 - CODE - Controlling a Bulb with a Physical Switch.ino | 819.2 B | ||
| 5. CODE - Testing One Input of 4 Channel Relay.html | 512 B | ||
| 5. Output - Controlling a Bulb with a Physical Switch.mp4 | 27.4 MB | ||
| 5. Setting Up ESP32 in Arduino IDE.mp4 | 49.6 MB | ||
| 5. Testing the Live OUTPUT of the Project using Mobile App.mp4 | 71.9 MB | ||
| 5. Understanding the Code to Control 4 Home Appliances with ESP Rainmaker (PART 1).mp4 | 78.5 MB | ||
| 5.1 L16 - CODE - Testing One Input of 4 Channel Relay.ino | 307.2 B | ||
| 5.1 esp32-url.txt | 204.8 B | ||
| 6. OUTPUT - Testing One Input of 4 Channel Relay.mp4 | 58.1 MB | ||
| 6. Testing the ESP32 Board (PART 1).mp4 | 34.4 MB | ||
| 6. Testing the Live OUTPUT of the Project using External Adapter Only.mp4 | 36.6 MB | ||
| 6. Understanding the Circuit Diagram to Control 4 Bulbs with 4 Physical Switches.mp4 | 48.2 MB | ||
| 6. Understanding the Code to Control 4 Home Appliances with ESP Rainmaker (PART 2).mp4 | 88.1 MB | ||
| 7. Circuit diagram to Control 4 Bulbs with 4 Physical Switches.html | 102.4 B | ||
| 7. Testing the ESP32 Board (PART 2).mp4 | 43 MB | ||
| 7. Testing the Live OUTPUT of the Project Without WIFI.mp4 | 30.3 MB | ||
| 7. Understanding the Code to Control 4 Home Appliances with ESP Rainmaker (PART 3).mp4 | 49.2 MB | ||
| 7. Write a program to concatenate two strings..html | 102.4 B | ||
| 8. CODE - Testing the ESP32 Board.html | 409.6 B | ||
| 8. Fundamentals of ESP32, Relay and IoT.html | 102.4 B | ||
| 8. Relay Program.html | 204.8 B | ||
| 8. Understanding the Code to Control 4 Bulbs with 4 Physical Switches (PART 1).mp4 | 33.9 MB | ||
| 8. Understanding the Code to Control 4 Home Appliances with ESP Rainmaker (PART 4).mp4 | 107.1 MB | ||
| 8.1 L11 - CODE - Testing the ESP32 Board.ino | 307.2 B | ||
| 9. Project Summary.mp4 | 48.7 MB | ||
| 9. Understanding the Code to Control 4 Bulbs with 4 Physical Switches (PART 2).mp4 | 39.5 MB | ||
| 9. Understanding the Code to Control 4 Home Appliances with ESP Rainmaker (PART 5).mp4 | 30.6 MB | ||
| 9. Write a program to print all the even numbers between 1 and 20..html | 102.4 B | ||
| Bonus Resources.txt | 409.6 B | ||
| Get Bonus Downloads Here.url | 204.8 B | ||
| ▲ 67 total files | |||
Home Automation with ESP32 and Google Home 2023
https://DevCourseWeb.com
Published 7/2023
Created by Comfiny .,Technical Support Team
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz, 2 Ch
Genre: eLearning | Language: English | Duration: 52 Lectures ( 3h 4m ) | Size: 1.7 GB
Automate your Home step by step using ESP32, IoT Dashboard and Google Home
What you'll learn
We will gain a comprehensive understanding of the ESP32 board and its role as the central device for the project development.
We will understand the functionality and utilization of different GPIO pins available on the ESP32.
You will learn to test each hardware module thoroughly before deploying it in the project.
We will install the Arduino IDE and test the functionality of ESP32 board manager library for the ESP32 using basic program.
We will explore the working principle and functionality of relays, also study the circuit diagram and implement the code to control the corresponding device.
We will address and resolve the inverted relay problem through various approaches.
We will integrate physical switches into our circuit and control the devices accordingly.
We will explore IoT for remote device control, MQTT protocol and its underlying mechanisms.
During the project deployment, we will identify and troubleshoot common errors.
We will test our main project using both the mobile app and physical switches to control connected appliances.
Requirements
Prior programming knowledge is recommended for this course to ensure a smooth learning experience.
Familiarity with programming concepts and fundamentals will help you grasp the course material more effectively.
| torrent name | size | uploader | age | seed | leech |
|---|---|---|---|---|---|
| 2.5 GB | freecoursewb | 2 months | 6 | 6 | |
| 3.1 GB | freecoursewb | 2 months | 6 | 7 | |
| 359.5 MB | freecoursewb | 2 months | 7 | 0 | |
| 466.1 MB | freecoursewb | 2 months | 10 | 2 | |
| 421.6 MB | freecoursewb | 2 months | 0 | 0 |
All Comments